www.raycap.com
©Raycap • All rights reserved
(320-1369) Rev.1
Page 3 of 10
INSTALL INSTRUCTIONS
RSCAC-1333-P/PS/PH-240
2.0
Introduction
The small cell architecture is a crucial component of 4G LTE and 5G networks because they
increase network capacity, density and service coverage to the end user for both in-building
and outdoor wireless service. Newer small cell designs include clusters of ‘virtualized cells’
run from a central controller, and low power remote radio heads. Small cell equipment is
exposed to the elements on street lights, utility poles, buildings and other structures powered
and connected by copper cabling. Power runs along this conductive path, making the active
equipment at each site vulnerable to damage by direct lightning strikes. Protection systems
installed in front of both the BBU and the RRH must be able to withstand direct lightning
currents in order to protect the sensitive equipment. Raycap’s small cell solutions featuring
Strikesorb
®
SPD technology significantly enhance the reliability & availability of the site by
providing superior electrical protection.
3.0
Raycap AC Disconnect Package Contents
1 each
Enclosure, Mounting Hardware
Metal Mounting Bracket
Bracket Hardware Kit
Note:
•
Models with “-PS” in the model number
incorporate a Shunt Trip for emergency
disconnect means from outside of the enclosure
•
Models with “-PH” in the model number
have the option of a screw down Hingless
lid design for use in tight quarters, such as inside light pole Small Cell structures
3.1
Prerequisites
This document describes how to install the RSCAC-1333-P/PS/PH-240 on-site and how to
mount, and connect it to external interfaces.
Installers of Raycap’s RRH surge protective and power management solutions must be
industry professionals who have attended training on the proper installation of the equipment
by Raycap and/or the mobile operator. Installers are required to read this installation guide
thoroughly prior to installation of the Raycap RRH protection equipment.
3.2
Required Tools & Supplies
7/16” Nut driver (mounting bracket)
Wire cutter
Wire strippers
#1 Philips head screwdriver
QUESTIONS? VISIT WWW.TALLEYCOM.COM OR CONTACT TALLEY AT 800.949. 7079 OR [email protected] TODAY.
