Raycap DC12-48-60-0-25E, Руководство по установке

Страница: 4 / 10

DC12-48-60-0-25E
INSTALL INSTRUCTIONS
www.raycapsurgeprotection.com
©Raycap • All rights reserved
(320-0666) Rev.B
Page 2 of 10
1.0
Copyright
©
Raycap, Inc. 2013 - All Rights Reserved
1.1
Disclaimer
The information in this document is subject to change without notice and describes only the
product deined in the introduction of this documentation. This documentation is intended for the
use of Raycap customers only for the purposes of the agreement under which the document is
submitted, and no part may be used, reproduced, modiied or transmitted in any form or means
without the prior written permission of Raycap. The documentation has been prepared to be used
by professional and properly trained personnel, and the customer assumes full responsibility when
using it. Raycap welcomes customer comments as part of the process of continuous development
and improvement of the documentation.
Raycap has made all reasonable efforts to ensure that the instructions contained in this document
are adequate and free of material errors and omissions. Raycap will, if deemed necessary explain
issues which may not be covered by this document.
The contents of this document are subject to revision without notice due to continued progress in
methodology, design and manufacturing. Raycap shall have no liability for any error damage of any
kind resulting from the use of this document.
1.2
Warnings
Please read this manual prior to use to become familiar with the product’s numerous features and
operating procedures. To maintain the maximum degree of safety, follow the sequences as outlined.
Before using the product, read all instructions and cautionary markings on the product and on any
equipment connected to the product.
CAUTION – Unless otherwise noted, product usage that is not recommended or sold by the product
manufacturer can result in risk of ire, electric shock, or injury to persons.
CAUTION – Do not operate the product if it has been damaged in any way. Return damaged
products to their manufacturer for repair or replacement.
CAUTION – Do not disassemble the product as incorrect reassembling can risk electrical shock
or ire.
WARNING – Disconnect or disable the DC power source to the product prior to beginning its
installation. Ensure that the DC power source to the product remains de-energized until the
completion of the installation and after all connections have been veriied to be correctly conigured.
For conditions other than those described above, please contact a Raycap Account Representative
at (208) 777-1166, (800) 890-2569 or www.raycapsurgeprotection.com
Thank you for choosing quality products from Raycap.