Basic Connection:
The connection diagram represents the installation.
To activate the
Ray Pico Projector
, connect any TV video output from a
camera, CAMCORDER, iPod
®
, Iphone
™,
MPEG Video player, or phone
to the TV input terminal of the BEAM.
4
Getting Started with
Ray
Set-up Information:
Slide the ON/OFF switch to the ON position. The Power/Charge Light
will flash at a rapid rate about once every 1/2 second (approximately
120 flashes per minute). If the AC adapter is not attached and the light
does not flash, the
Pico Projector
Battery must be CHARGED.
Flashing Light
OFF
ON