6
How to recharge
How to turn ON light
* Because this product uses a lithium ion battery, additional recharge may be performed.
* Safety design to prevent overcharge is adopted.
* The AC adapter generates noise during charging mode but it does not mean that the product has failed.
* Make sure to recharge until the battery indicator turns green.
* Recharging would not start when the main switch is at OFF.
* When charging error occurs, perform "turning OFF and ON the main switch" operations twice to reset the
system.
(2) Lift the misoperation prevention cover
and press the light switch.
(1) Set the main switch to ON.
* Do not remove the translucent silicone cover of the light switch.
* In the lit mode, the LED indicator of the light switch is lit in red.
* When used near wireless equipment, it can cause the battery protection circuit to disable the product.
When this occurs, recharging operation can reset the circuit to help the light turn ON.
How to light continuously with AC adapter
(1) Lift the waterproofing cover at the back of the main unit and connect the adapter plug to the charge
connector port.
(2) Set the main switch to ON.
(3) Insert the power plug of the adapter to the 100 V~240V outlet.
(4) Set the light switch to ON.
(5) Continuous lighting with the AC adapter starts.
(6) When the light switch is set to OFF, the light reverts to the charging mode.
(1) Lift the waterproofing cover at the back of the main unit and connect the adapter plug to the
charge connector port.
(2) Set the main switch to ON.
(3) Insert the power plug of the adapter to the 100 V~240V outlet.
(4) In the charging mode, the battery indicator is lit in red.
(5) When the battery indicator switches to green, the charging process is complete.
(6) Disconnect the adapter from the main unit and disconnect the power plug from the power outlet.
* When charging error occurs, perform "turning OFF and ON the main switch" operations twice to reset the system.
