5
INSTALLATION INSTRUCTIONS
RECOMMEND TOOLS:
• Drill
• Drill bit
• Pencil
• Ruler
INSTALLING SKI RACK
1. Locate studs in the wall if applicable. Check to make sure the location you want to
install the rack doesn’t damage any electrical wires, gas pipes, water pipes, or other
items within your wall.
2.
Using a level or ruler, mark a horizontal line with a pencil on the wall. The line you
make will indicate the position of the bottom of the rack.
3. Position the bottom of the rack against the line so that the top is facing up. Then,
mark the holes where the screws would go.
4. Drill three (3) holes into the marked areas. Remember to use a drill bit about ½ the
size of the screws.
5. Position the rack on the marked line and align the drilled holes you made in the wall
with the holes of the rack. Then, insert the anchors into the holes.
6. Place screws into the anchors and use the drill to tighten the screws into the wall.
Make sure the rack is secured firmly into the wall.
7. Start placing your ski gear onto the rack. Be sure the load on the rack is evenly distributed.
SPECIFICATION
Weight capacity:
11 lbs. (5 kg)
