ASSEMBLY
Take support
tubes 3-C and
screw onto the
threads of support
tubes 3-D.
Place four more
washers and
thread protection
spacers onto
each of the
threads, followed
by the next piece
of glass.
Add four more
washers, then
screw support
tube 3-B onto the
threads of support
tubes 3-C.
Place four
washers on top
of support tubes
3B, and place the
last piece of glass
on top of support
tube 3-B. Fit a
washer and a
thread protection
spacer over the
thread on the
domed top caps
(5), and screw the
four domed caps
into the support
tubes 3-B.
Adjust the feet
to the height
required, ensuring
the stand is level
in the location
you want to use
it.
11
13
12
14
3-C
3-B
6
2
Now your TC6 glass stand should be
assembled rigidly. We hope this stand
has all the features you require.
