Raw Thrills Fast&Furious SUPERCARS, Руководство оператора

Страница: 8 / 40

November 30, 2010
Game Networking
NOTICE: To link the two games together, use the crossover cable provided in the spare parts bag. Use of
another cable other than the one shipped with the game could void warranty or cause games not to link. Use
network cables which are at least CAT5 grade.
Networking Considerations
Each FNF Super Cars game comes with a network cable. Optionally, a hub can be installed and located remotely
to link additional units.
Take care to protect exposed game wiring from general foot traffic around the game. Use a conduit or wire way to
protect the cables as needed.
Please mark linking cables for your game if other such cables are in the vicinity to avoid confusion. Network
cables are not marked or coded.
Avoid routing the network cables near sources of heat, moisture or electrical energy such as neon lights,
compressor motors, transformers etc.
Networking Setup
1. Remove the network cable from the spare parts bag inside the cashbox.
2. Connect each end of the cable to network jack behind each PC.
3. Neatly route the cable through the notch on the back of the cabinet.
4. Use the SYSTEM ADJUSTMENT in TEST MODE below for enabling link feature .Press TEST Button to
access TEST MENU. Iis mounted inside the coin door of the cabinet.
5. Reset both games simultaneously and verify that link is successful. If not, check the settings for Machine ID
conflict and make sure that the network cable is connected properly and secured. Please refer to the Game
Troubleshooting Guide on this manual for more details.
SET NETWORK ENABLE= ON >>
SET UNIQUE MACHINE ID= 1-8 >>
The Fast and the Furious Super Cars • Copyright 2010 • Raw Thrills Inc • All rights reserved
. 8