Ravpower RD-WD009, Руководство пользователя, Страница: 6 / 27

05 / 06
Power Button Press to turn on / off the FileHub
Support up to 2TB SDXC
Support USB flash and HDD drive data transfer
(FAT32, exFAT, NTFS)
Provide 1A output current to compatible devices
Charge the FileHub
Data transfer with Micro USB devices
Press to start copying and backing up data
from the SD card to USB HDD
Press and hold for 3 seconds to cycle through
2.4GHz / 5GHz / 5GHz & 2.4GHz WiFi modes
Press and hold for 5 seconds to reset to factory
settings
Reset Button
WiFi Mode Button
SD to USB
Backup Button
SD Card Slot
Micro USB Port
USB A Port
Internet Indicator
Turns on white
Turns off Connected to interent
Disconnected from internet
Work Status
WiFi Indicator
Flashes
Stops flashing
Turns solid
Work Status
Initiating
Connecting
Connected to WiFi
5G Indicator
Turns on 5G WiFi connected
Work Status
SD card reading or writing
Work Status
SD card inserted
Unable to back up or error
SD Card Indicator
Turns on white
Flashes white
Turns red
Work Status
≥ 30%
< 30%
< 10%
Charging
Shutting down
Battary Indicator
Turns on white
Turns on red
Fast flashes red
Blinks every 2 seconds
Blinks every 0.5 second
Operation Guide
Note: The original file in your SD card will not be deleted.
LED Indicators
Button Control
Access the Filehub
1) One Key Backup
1. Turn on the Filehub.
2. Plug into your flash drive/ hard drive and SD card. Wait until the
SD card indicator stops flashing and turns solid on.
3. Press and hold the SD to USB backup button for about 5 seconds
until the SD card indicator flashes again, indicating the Filehub is
reading the SD card.
4. Wait until the SD card indicator stops flashing, so the one-key
backup is completed.
5. Now you can check your backup folder named “SD backup” in
your flash drive / hard drive via the app RAV FileHub.