Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.0
10
1. During the initial setup, our Wizard will automatically run and will guide you through the
step-by-step process on configuring the Wi-Fi SD/USB as seen on the screenshot below. You
may cancel this process by clicking on the “X” at the top right corner of the window. If you
cancel the Wizard, it will keep the factory default settings of your Wi-Fi SD/USB.
2. Click on the “Next” button. By default, the Access Point (AP)+Client is selected.
There are two available Internet Access options –
A. Access Point (AP) + Client. Connecting the Wi-Fi SD/USB to another wireless device to
have the internet access.
B. WAN. Directly connecting the Wi-Fi SD/USB to the available port on the back the router.
Selecting the AP+Client Option
-
SSID. Type-in the SSID name or click on the “Rescan” button to automatically search for the
available wireless network connections.
-
Password. Type-in the correct password to join the wireless network connection selected.
-
IP Address. Select either DHCP or Manually assign an IP address
o
By selecting DHCP, the host will provide an automatic IP address to connect to the
internet
o
By selecting Manual, you have to manually assign an IP address to connect to the
internet
