background image

Company Confidential 

 

4

 

Raveon Technologies Corp.

 

 

FCC MPE Regulations: 

WARNING: It is the responsibility of the user to guarantee compliance with the FCC MPE 
regulations when operating this device in a way other than described in this manual.  
 

Human Body Exposure:

  

This equipment is approved only for mobile and base station transmitting devices, 
separation distances of  

(i)

 

26 centimeters or more for antennas with gains of 0 dBi or less or  

(ii)

 

1 meters or more for antennas with gains 0 to 3 dBi should be maintained 
between the antenna of this device and nearby persons during operation. To 
ensure compliance, operation at distances closer than this is not recommended 
and the EUT has not been approved for operation with antennas having a gain 
that exceeds 3 dBi. 

 

1.4.  Part 15 Note: 

 

This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following measures: 

  Reorient or relocate the receiving antenna. 

  Increase the separation between the equipment and receiver. 

  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

  Consult the dealer or an experienced radio/TV technician for help. 

 

 

 

Содержание RV-PMTII










Отзывы: