Raven Viper 4, Руководство по установке

Страница: 27 / 34

CHAPTER
4
Manual No. 016-0171-559 Rev. C 23
Chapter 4
Mounting the Viper
®
4
and Viper 4+
•
The Viper 4 and Viper 4+ are resistant to limited exposure to the elements, however, the field computer is
not weatherproof. Mounted the unit inside of the machine cabin or drivers compartment within easy reach of
the driver or operator. If the vehicle cabin is not enclosed, remove the field computer at the end of each
days use.
The Viper 4 and Viper 4+ may be exposed to ambient conditions that do not pose a problem to field
operations such as light rain or windblown dust, however, if conditions require stoppage of field activities,
leave the Viper 4 or Viper 4+ in an enclosed vehicle cabin or moved to a dry location until field operations
resume.
•
The case is designed to allow a small air gap 1/8 inch [3 mm] between the mounting bracket and the case to
allow air flow over the case cooling fins. Do not seal or obstruct this air gap, or otherwise modify the case.
Note:
It is normal for the case to become warm to the touch while in operation.
•
Securely fasten the RAM mounting arm to a suitable, flat surface. Once mounted, the RAM mounting arm
must provide a stable base for the console and should not impede normal machine operation.
•
The field computer should be mounted in a location where it will not be jarred during normal equipment
operation. Keep the computer clear of moving elements within the machine cabin.
•
Route all cables to avoid tripping hazards and protect the cable from kinking or breaking during operation.
NOTICE