Raven SmarTrax Case IH Steiger 335, Руководство по установке

Страница: 18 / 36

Chapter 3
14 Case IH Steiger & New Holland TJ/T90X0 SmarTrax™ Installation Manual
FIGURE 9.
Pressure Hose Removed from the Steering Valve
4.
Remove the pressure hose from the fitting installed in port PS of the steering valve fitting as shown in the
figure below.
Note:
On smaller models, the pressure line is a steel tube. On larger models, the pressure line is a hose.
FIGURE 10.
Pressure Hose Removed from the Bulkhead (If Applicable)
5.
Smaller Models Only - Disconnect the pressure tube and hydraulic hose from the bulkhead fitting as shown
in the figure below.
Note:
Store the disconnected pressure tube in a safe place for future use in case the SmarTrax system is
removed from the machine.
PS Port Circled at the Axle Mounting Location
(Bottom View)
PS Port Circled at the Cab Mounting Location
(Top View)
Front of Machine
Front of Machine
Disconnect Here