Sludge Interface Detector
SID-20200
USING THE SID-20200
IMPORTANT
Pg 1
HIGH sensitivity detects relatively small and
large solids.
POWER button activates unit
SENS display indicates current sensitivity
setting
HORN sounds when enabled and probe sensor
obstructed
The SENS button cycles LOW, MED and HIGH
sensitivity settings.
LOW sensitivity ignores relatively small solids,
but detects large solids.
SENS button toggles probe sensitivity
PROBE TRAVEL updates when cable passes
across roller
ZERO button resets travel value
HORN button enables horn
LOW BATT displays when battery change
required
INTERFACE lamp illuminates when probe
sensor obstructed
When solids detected, the INTERFACE lamp
illuminates and the horn sounds.
The displayed SENS value indicates the probe
sensitivity setting.
TOOL FAMILIARITY
Store the probe on the case handle hook,
while carrying the unit.
Probe stored on hook prolongs the life of
the cable and probe.
Wrap cable loosely on cable rack to
prolong cable.
Lower probe to just contact tank bottom
Place cable on COUNTER ROLLER
Raise probe until INTERFACE lamp illuminates
Note PROBE TRAVEL distance
Press POWER button to activate display
Press ZERO button to reset display value
Accuracy and ease of use
taken to a new level!
