5 © 2010 Newton Crouch Inc. This information is the property of Newton Crouch Inc. and is loaned confidentially for the sole use of our customer. It must not be
used in any way detrimental to our interest or shared with outside parties. Technical Tips/Raven—SCS 660 Programming Instructions revised
Rev 2.27.18
Valve Cal:
__________
9
Enter number that represents selected valve 9
(number can be customized)
Rate Cal 1:
__________ 10
Your spread rate in Pounds per acre
Rate Cal 2:
__________ 10
A
Desired Pounds per acre
(If a different second rate is not being used,
enter the same value as entered for rate but not zero)
With these selections you are now ready to enter the data into your console
.
If you make an entry or selection error
during the first 6 steps, turn the POWER
ON/OFF switch to the OFF position, de-
press the CE button and hold it down
while turning the POWER ON/OFF
switch to the ON position.
This will reset the console
If RPM setting is used, go to
DATA MENU
_________ 11
then to
FAN CAL
Values for SCS660 =12 / ViperPro & EPro = 120
