Raven SCS 460, Руководство по установке

Страница: 13 / 28

Manual No. 016-0171-079 Rev F 9
ACCUBOOM INSTALLATION
FIGURE 4. AccuBoom Node Installed
4. Determine a suitable location on the inside of the cab, located below the SCS 460 console, in which to mount
the node.
5. Using the holes on the node and driver as patterns, drill holes needed to mount the node and driver.
NOTE: Drill two holes per device being mounted.
6. Mount the node and driver at the chosen mounting locations.
CONNECT THE ACCUBOOM CABLE TO THE BOOM SWITCHES
IMPORTANT: Work with only one boom switch and console wire at a time! Refer to the appropriate table on the
following pages (depending on the number of boom valves) when connecting the machine’s boom wires
to the AccuBoom cable.