CHAPTER 3
10
SC1™/TC1™ Installation Manual for Fendt 200 VFP Varioguide (with Fendt One, Model Year 2021)
5. Connect the SC1/TC1 cable for Fendt 200 gen3 (P/N 115-4010-239) to the SC1 ECU, the 700S receiver, and the
Slingshot Field Hub.
NOTE:
Route the X4250 connector on the SC1/TC1 cable toward the back of the roof. This connector will
connect to the Fendt roof port as described in the
MountConnect the Harness
section on page 10.
6. Install the roof plate and install the plastic cover.
CONNECT THE HARNESS
1. Remove all 10 screws from the roof to access the connectors within the roof. There are 5 screws on each side.
FIGURE 3. Roof Cap Screw Locations
2. Locate the X3058 connector at the roof line on the right side of the machine cab.
