Raven RCM ARAG Bravo, Руководство по установке

Страница: 9 / 26

CHAPTER
2
Introduction: Installation Best Practices 5
CHAPTER 2
INTRODUCTION
The Raven Rate Control Module (RCM) is a multi-product application control system built on an ISOBUS platform.
The Raven Rate Controller Module is designed to provide a machine operator the ability to simultaneously
monitor and control five product applications such as liquid, granular, NH3, and direct injection via ISOBUS
Universal Terminal (UT) and task control for as-applied documentation, prescription rate, and section control.
INSTALLATION BEST PRACTICES
RECOMMENDATIONS
Before installing the RCM™ system, park the machine where the ground is level, clean, and dry.
During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.
POINT OF REFERENCE
The instructions in this manual assume that you are standing behind the machine, looking toward the cab.
WARNING
Carefully read and follow all safety requirements
and precautions contained in this manual and the
machine-specific Installation Manual. Failure to
follow safety instructions may lead to equipment
damage, personal injury, or death.