Raven OmniSeed, Краткое руководство пользователя

Страница: 6 / 30

5
CAN Controller Status Screen
See the screen below and the
corresponding sections for a description
of the CAN Controller Status screen.
1.
Section Cals Area
- Current
sections that have been configured.
Touch in this area to access the Section
Setup screen and assign sections to
products.
2.
Fan Speed
- Touch this area to set
the air cart fan hi and low speed limits
and turn fan alarm on or off.
3.
Miscellaneous Area
- Various
system settings and actual system
readouts. Touch in this area to change
the displayed settings.
4.
Feature Settings Area
- The
upper portion of the Feature Settings
area displays the selected product
node or control channel. Touch the
indicators to display the current settings
for each node.
The lower portion of the Feature Settings area displays the current alarm and
feature setting selections. Touch in this area to access the feature and alarm
settings.
5.
Product Control Settings Area
- Displays the current product control
settings for the selected product node or control channel. Touch in this area to
configure product control for the selected node or channel.
6.
Pressure Area
- Dual pressure readouts for two different systems. Touch in
this area to calibrate pressure readouts.
7.
Application Area
- Valve and application types used to apply the product.
Touch in this area to select a different valve type and/or application type.
8.
Tally Registers
- Touch this button to access the tally registers. Also
displays the distance traveled by the vehicle. All values can be reset to zero,
when not in a job.
9.
CAN Profile
- Touch this area to set up profiles for different products.
7
1
5
4
3
6
8
2
9