15
Lit. No. M100V Rev. A 1/3/11
STEP 15
Check here to enable Automatic Steering.
Use the “Automatic Transmitter Steering
Options” window to set the Automatic
Steering mode countdown timer. This timer
keeps the Raven SNR Vote Group in
Automatic Steering mode until all voted
receiver audio and all console audio has
ceased. Once all audio has ceased, the timer
starts counting down. If any port gets voted,
or any console audio occurs, the timer is
reset, forcing the vote group to stay in
Automatic Steering mode. If all audio
ceases, and the timer expires, the vote group
transitions back to Default mode.
The “Automatic Transmitter Steering
Options” window is also used to set a
minimum amount of time that a receiver
must be voted before it can be designated
“last voted”. This avoids spuriously-voted
receivers from becoming last-voted.
Note: Automatic Transmitter Steering affects where console audio
gets transmitted. If Automatic Transmitter Steering is enabled,
console audio will be transmitted from any transmitter that has the
currently-voted receiver in that transmitter’s receiver routing. Also,
during the countdown period of the Automatic Steering countdown
timer, console audio will continue to be sent to transmitters having
the “last-voted” receiver in that transmitter’s receiver routing.
STEP 16
Finish creating the Raven SNR Vote Group by
assigning a name to the vote group, and
choose one of the options to enable and/or
save the new vote group.
