PAGE 13/30 |
Installation manual
|
016-5035-065EN
|
Rev. A1
STEERING SYSTEM INSTALLATION | RAVEN EUROPE KIT INSTALLATION MTZ - BELARUS
1.2.2
HYDRAULIC VALVE INSTALLATION
Figure 4 shows the manifold mounted onto a manifold
bracket with four M8 bolts. The manifold bracket is
preferably mounted at the left-hand side of the MTZ
tractor (Figure 7) because this is usually the side of the
tractor with the most space.
Method of mounting:
•
Unscrew toolbox (Figure 5).
•
Mount the Manifold Bracket (107-8000-062) to
the tractor frame on a holses showed on a
Figure 6.
•
Install the Manifold valve to the bracket (107-
8000-062).
•
Mount toolbox back (Figure 7).
Please note!:
Make sure the connectors of the valves and the
pressure sensor can still be connected after
mounting the manifold.
FIGURE 7 MANIFOLD BRACKET WITH A MANIFOLD AND
HURAILIC DRIVE UNIT MOUNTED ON MTZ
FIGURE 5 TOOLBOX
FIGURE 6
TRACTOR FRAME HOLSES FOR THE MANIFOLD
BRACKET MOUNT
FIGURE 4 MANIFOLD BRACKET WITH A
MANIFOLD AND HURAILIC DRIVE UNIT
MOUNTED
