Raven Case IH SmartTrax SPX 3230, Руководство по установке

Страница: 17 / 36

3
Manual No. 016-5032-081 Rev. A 13
Hydraulic System Installation
FIGURE 6.
Pressure Hose Installed
3.
Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) on the steel pressure line.
4.
Connect the machine’s pressure hose to the opposite end of the installed tee fitting.
5.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-318) on the 90° end of the installed tee
fitting.
6.
Connect the straight end of the installed hydraulic hose to Port P of the SmarTrax valve.
Install the Tank Hose
1.
Locate the machine’s steel tank line.
Note:
The pressure line runs on the inside of the frame from the rear of the machine. Trace it to the T
port on the steering orbital if necessary.
2.
Disconnect the machine’s tank hose from the steel tank line.
FIGURE 7.
Tank Hose Installed
3.
Install a -8 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-028) on the machine’s steel tank line.
4.
Connect the machine’s tank hose to the opposite end of the installed tee fitting.