Raven 600S, Инструкция по установке и эксплуатации

Страница: 9 / 16

P/N 016-0171-614 Rev. A 5
Installation & Configuration
2
Required Components
•
600S Antenna (one of the models listed below)
a.
Base Model (063-2000-001)
b.
GS Model (063-2000-002)
c.
RTK Model (063-2000-003)
•
Cable (one of the cables listed below)
a.
Standard Cable (115-0172-246)
b.
Phoenix 200 Adapter to 600S Cable (115-0172-303)
c.
Case/Miller Adapter Cable (115-0172-285)
d.
Case 30 Series Cable (115-0172-288)
System Power Requirements
In order for the 600S to perform properly they system must meet the following criteria:
•
+8 to 36V DC
•
12V at the switched power is operational voltage for convergence. Lower voltages may work but
convergence times will be longer or may not converge.
•
2.9 Watts
Installation
1.
Mount the GPS receiver on top of the vehicle cab with no overhead obstructions.
2.
Follow the appropriate system drawing (below) for cable connections.