Raven 600S, Инструкция по установке и эксплуатации

Страница: 13 / 16

P/N 016-0171-614 Rev. A 9
Installation & Configuration
Note:
All 600S receivers are unlocked to support GPS and GLONASS as well at the enhanced Dual
Frequency GL1DE to improve pass to pass accuracy.
TABLE 3.
600S GPS Configuration
Correction
Type
Details Additional Information
GL1DE Only
(Autonomous
Mode) Because of the limited accuracy, this mode is only
recommended for customers where SBAS (WAAS,
EGNOS, MSAS) is unavailable.
SBAS (WAAS,
EGNOS,
MSAS)
This mode is available for customers in North
America and Europe. Refer to the figure below to
determine SBAS availability.
• Leave the PRN settings to ATUO for
optimal SBAS availability.
• To fix the satellite PRN for SBAS
correction, select a satellite from the list.
GS Slingshot
In order to support GS, the receiver model must be
an unlocked model (063-2000-002, 063-2000-003)
or enter an unlock authorization code. Authorization
codes can be purchased at www.ravenhelp.com.
To receive Slingshot GS corrections through the
Slingshot Field Hub, contact a Raven dealer to
purchase the unlock.
Select the accuracy level to begin field
operations. Note that smaller accuracy
levels will result in longer convergence
wait times at receiver startup before the
GPS status indicators reach a green state.
• Receiver convergence times depend on
satellite availability (clear view of the sky)
and atmospheric disturbance levels.
• Slingshot GS absolute horizontal
position accuracy is typically 6” (15 cm)
when fully converged.
Note: Leave the accuracy level at
maximum for quicker first time
convergence.