Choose mounting hardware according to the type of
mounting surface, ensure you use the proper hardware that
will support the weight of the speaker.
70V Wiring
Stereo Wiring
1. Remove the mounting bracket from the speaker by loosening the end caps.
You can use the mounting bracket as a template to mark the holes on the
mounting surface.
2. Attach the mounting bracket securely to the mounting surface.
3. Install the speaker in the mounting bracket using the end caps.
4. Remove the rear cover and connect the speaker cable to the + and -
terminals and replace rear cover.
Transformer
When using the speakers are used for stereo operation
please ensure that the 8Ω setting is selected.
When the speakers are used for70V operation please
choose one of the tap settings 5W-10W-20W-40W
Wiring
Connect the coresponding speaker to the amplifier terminals. If
wiring for stereo operation please ensure that the
+
and
-
polarity
are correct for each speaker. If wiring for 70V operation you can
connect speakers together in a daisy chain configuration.