RK Series
Specifications
RK Series In-Ceiling Speaker Specifications
RK-650-ICA-B
6.5” Angle In-Ceiling Speaker
R -
-IC
”
In-Ceiling Speaker
K 830
A-B
8 3- Way Angle
Rave Technology
G6434 South Dort Highway, Suite 2
Grand Blanc, Michigan 48439
Tel: 1-810-953-3918
www.ravetechnology.com
6.5” Woven Kevlar cone, rubber surround, 22oz Magnet, 1" voice coil, Bumped back plate,
vented pole piece
1" Titanium Dome tweeter, Ferro-fluid cooled, Neodymium magnet, Swivel 30 degrees
FR4 PCB board, 12dB woofer section,
12dB tweeter section, Polyimide auto protective reset switchfor tweeter
16AWG wire connection to woofer section
Gold plated terminal posts will accept 14AWG wire
+/- 3dB On woofer and tweeter
48Hz- 22KHz
88dB
10-150 watts
4 / 8ohm switchable on PCB
7.95"
11LBS
15.5” (H) 11.5” (W) 11" (L)
SHIPPED WITH GRILLES,
PAINTMASK, CUTOUT TEMPLATES AND
PRE-CONSTRUCTION BRACKETS
Woofer:
Tweeter:
Crossover:
Attenuation switches:
Frequency Response:
Sensitivity:
Recommended amplifier power:
Impedance:
Cut Out size:
Weight (pair pack):
Dimensions (pair pack):
Woofer:
Midrange:
Tweeter:
Crossover:
Attenuation switches:
Frequency Response:
Sensitivity:
Recommended amplifier Power:
Impedance:
Cut Out size:
Weight (pair pack):
Dimensions (pair pack):
8” Woven Kevlar cone, rubber surround, 25 oz Magnet, 1.25" voice coil, Bumped back plate,
vented pole piece
3" Woven Kevlar cone, rubber surround,
1" Titanium Dome tweeter, Ferro-fluid cooled, Neodymium magnet. Swivel 30 degrees
FR4 PCB board, 6dB Woofer section, 24dBmidrange section, 12dB tweeter section, separate
polyimideauto protective reset switch for tweeter and midrange
16AWG wire connection to woofer section
Gold plated terminal posts will accept 14AWG wire
+/- 3dB On woofer, tweeter and midrange
45Hz- 22KHz
89dB
10-150 watts
4 / 8 ohm switchable on PCB
9.64"
15.75LBS
17.75” (H) 13”(W) 13.75” (L)
SHIPPED WITH GRILLES,
PAINTMASK, CUTOUT TEMPLATES AND
PRE-CONSTRUCTION BRACKETS