5
Product Configurations
Assembling your Extreme Turbo Chute
Step 1: Setup
Make sure the slope and surrounding area are free from
obstructions. If using into a lake, ensure lakeshore and planned
entry area into the water are free from obstructions as well. Ensure
that the entire length of the chosen slide path is free of rocks,
bumps, depressions, sticks, etc., and the surface beneath the
Extreme Turbo Chute is either smooth grass or sand.
A minimum of 7
°
slope angle is suggested for sliding (approx. 5 ft
drop in 40 ft of length). DO NOT exceed 40
°
slope angle.
C A U T I O N
THE STEEPER THE SLOPE,
THE FASTER AND FURTHER YOU WILL SLIDE
DO NOT use on slopes that create danger to the user as a
result of excess speed.
!!
(x3)
20’ Straight
sections (#02697)
(x2) Start Ramps
(#02445)
(x10) Turbo Sled
(#02446)
Any number of 20’ Straight
Sections can be added to
accommodate any slide length.
All manuals and user guides at all-guides.com