Rave Sports Splash Trax Abyss, Руководство пользователя

Страница: 35 / 53

35
Notes for Full Tilt:
1. Inflate the base to the
recommended pressure (2.5 psi).
2. With the top pivot / ramp assembly
piece upside down, inflate to 1.5 psi
beginning with 2 side tubes, then 2
rocker tubes (4 valves).
3. Flip right side up and inflate ramp,
then top off the ramp with a hand
pump to achieve desired firmness of
6-8 psi.
4. Move both pieces to shallow water
and connect the ramp assembly to
the base by connecting the four
Kwik-lok Straps included to the D-
rings on the pieces in a diamond
shape as shown.
NOTE: Centers of pivot tubes
should be lined up with the yellow
line on the base tube. Tighten all
straps equally to hold the pivot ramp
at this yellow line.
Pivot
Tube
Pivot
Tube
Base Tube
Straps