4
3. Against a Tennis court fence
4. On a soccer goal post
5. In an unfinished basement
How to install the Attack Zone
shooting tarp
1. Make sure the place of
installment has enough space
for a 7’ or 8’ height and 16’
width.
NOTE:
If necessary, the sides of the tarp can be rolled or
folded inward to reduce the width required.
2. Measure the door frame to determine if you have a 7’ or 8’
opening. The top grommets of the tarp are for use on 8’
openings. The lower set of grommets are for garages with 7’
openings.
3. Mark the center point of the top
door frame and drill a pilot hole
in this location.
4. Install the wooden dowel(s) into
the sleeve pocket along the
bottom edge of the tarp.
5. Starting at the center and
working across to both corners
of the tarp, insert the screw
into the washer and then
screw in place.
6. Your tarp may be left
permanently installed and
rolled up when not in use. To
do this, place ball bungees
between the tarp and wall at
Содержание Attack Zone
Страница 7: ...7...