Rave Sports Aqua Mat LTD 18 03026, Руководство пользователя, Страница: 8 / 16

7
Liability
While every attempt is made to embody the highest degree of protection in all
equipment, we cannot guarantee freedom from injury. The user assumes all risk of
injury due to use. All merchandise is sold on this condition, which no
representative of the company can waiver or change.
Assembling Your Aqua Mat
Inflation
Roll out the Aqua Mat on flat ground or on a flat area at the
end of your boat with the boat motor turned off. Make
sure the area is free of rocks, sticks or other sharp objects
that could puncture or damage the product.
Use the enclosed hand pump to inflate the Aqua Mat, or for
more rapid inflation and deflation we recommend using the
RAVE Rapid Inflator / Deflator. ( Item #03063 not included;
sold separately at www.ravesports.com )
To lock open valve, depress the stem and rotate ¼ turn
clockwise. To close valve, depress the stem and rotate ¼
turn counter-clockwise. The valve stem should be in the
depressed position while inflating. Replace cap on valve
after inflation to ensure air tight
seal.
If you are using the RAVE Rapid
Inflator / Deflator ( Item #03063 ),
simply lock the adaptor onto the end of the inflation hose
and insert into the valve body. Turn ¼ turn to lock in place.
To check the exact pressure of your product the use of a RAVE Digital Pressure
Gauge ( Item #02809, sold separately on www.ravesports.com ) is recommended.