Page
17
of
26
Printer manual
PRP-PAP-STAR-2
paper, double, friction feed, white/yellow
114xØ70xØ12 mm.
PR-STAR-PIN
Picture
Paper change
Turn off the power of the printer.
To remove the old paper, cut the paper close to the slot and use the feed button until paper has
passed completely through the printer.
Note: Do not try to remove the paper by hand as it could become crooked and get jammed inside
the printer.
For placing the new paper, make a straight cut along the top of the paper, about 1/4 inch away
from the sprocket holes, (as shown in the drawing 1). If there is perforation, cut the paper on the
perforation.
