USER MANUAL
–
i
Forks-52 (BLE)
40
The maintenance guidelines for normal forks apply to the forks of the mobile weighing
system.
Main guidelines:
•
The weighing system meets up to the protection class IP65. This means that dust or
moisture (rain or water beam from all sides), will not influence the operation of the
electronics. However, high-pressure cleansing in combination with warm water or
chemical cleansers will lead to the entry of moisture and therefore negatively
influence the operation of the system.
•
Only specialists may undertake any welding. This is to avoid damage to electronics
and load cells.
•
All safety regulations that apply to the forklift truck remain valid and unchanged;
•
No weighing operations are allowed if any persons or objects are in the vicinity;
around, under or close to the load;
•
Any modifications done to the system must be approved in writing by the supplier,
prior to any work being completed;
•
It is the sole responsibility of the purchaser to train their own employees in the proper
use and maintenance of this equipment;
•
Do not operate this unit unless you have been fully trained in its capabilities;
•
Check the accuracy of the scale on a regular basis to prevent faulty readings;
•
Only trained and authorized personnel are allowed to service the scale;
•
Always follow the operating, maintenance and repair instructions of the forklift truck
and ask the supplier when in doubt;
•
RAVAS is not responsible for errors that occur due to incorrect weighing or
inaccurate scales.
6. Maintenance
