8
Control panel
1
Two levels switch, heating level I : 1000W
、
level II : 2000W
。
2
Adjustable thermostat, 0
～
40 Celsius
，
270 degree.
First turn the thermostat to the maximum position
，
switch the appliance on with the biggest power
input
，
when the desired room temperature is reached
，
turn the thermostat anticlockwise till it
turns off (a “click ” is heard). The thermostat then will automatic turn on and off to keep the room
temperature constant.
It’s normal when odor is blew off from the PTC heating element by the first use. It will cease to
happen when used again.
After the use, follow the below steps to operate the heater:
-
turn off the thermostat
-
turn off the switch(OFF position),
-
unplug and let the appliance cool down in the air.
When the appliance cools down completely, put it in the packaging. Avoid to store the unit before
the heating element doesn’t cool down, it’s dangerous to store the hot unit.
Maintenance:
Always pull the plug out of the mains socket before starting any maintenance work. Let the heater cool down.
Clean with a dry or slightly wet cloth. Do not pour water or other liquids onto the device; do not submerse any
part in water. Manufacturer reserves the right to change the technical parameters of the device without notice.
When the device is switched on after a long period, a burning smell may be produced by the dust on the
heating element. After some time, the smell subsides.
Technical service:
All devices undergo a thorough post production control. If you still find any fault, you can ask technical
service for help.
Before you talk to technical service, check if:
- there is power in the wall socket,
- you followed this manual when turning the device on.
Do not:
- install the device near furniture, below shelves, inside walls, and near curtains; cover the device
when it is turned on; and always try not to hinder its correct operation.
1
2
