INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 22 of 60
12.5 Wheel clamping
All rims must be locked on the rubber plate (
Fig. 24
ref. 1
) through the central hole using the proper lock-
ing device (
Fig. 24 ref. 2
).
1
2
Fig. 24
IN CASE OF USE OF RIMS WITHOUT
CENTRAL HOLE, IT’S NECESSARY
TO USE THE PROPER FIXTURE
(AVAILABLE ON DEMAND).
To lock a rim proceed as follows:
1. Dowel the wheel (
Fig. 25 ref. 1
) on the locking
platform and check that the dragging pin (
Fig. 25
ref. 2
) enter in a hole placed on the rim hub.
Fig. 25
2. If the wheel hub is higher then the dragger (
Fig. 26
ref. 2
), use the extension (
Fig. 26 ref. 1
) supplied
on issue.
Fig. 26
3. Insert the shaft complete with cone (
Fig. 27 ref. 1
)
on the rim (
Fig. 27 ref. 2
).
Fig. 27
1
2
RAVAGLIOLI S.p.A.
7300-M018-2_R
G8945.26 - G8945IT.26 - G8945V.26 - G8945ITV.26 - G8945V.26S - G8945ITV.26S - G8945D.26 - G8945ITD.26 - G8945D.26S - G8945ITD.26S
