7700-M002-3
GB
ASSEMBLING AND USE
INSTRUCTIONS
Page 12 of 22
PLUS91S - PLUS91N
PLUS91SE - PLUS91SA - G800A69
2 - Position the wheel on the chuck.
3 - Lower the control unit lever in order to lower the lift-
ing device.
4 - Carry out all the tyre assembly and disassembly op-
eration, loose the chuck wheel.
5 - To raise the lifting device, lift the control unit lever
again.
6 - Place the wheel onto the lifting device.
7 - Lower again the control unit lever (
Fig. 20 pos. 1
) in
order to let the lifting device move down (use a hand
to follow its descent) (
see Fig. 20
).
KEEP A HAND ON THE WHEEL
DURING ALL LIFT RISING AND
DESCENT PHASES TO ENSURE
THAT THE WHEEL CANNOT
FALL FROM THE LIFTING DE-
VICE DUE TO IMBALANCES.
1 - After the wheel has been placed onto the lifting de-
vice (
Fig. 18 pos. 1
), lift the control unit lever (
Fig.
18 pos. 2
) and move the wheel upwards, until it can
be placed onto the mandrel (use a hand to follow its
movement) (
see Fig. 19
).
Fig. 18
Fig. 20
Fig. 19
