INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 21 of 60
3
1
2
Fig. 28
7. Fit the cone (
Fig. 28 ref. 3
) with the narrowest part
turned towards the wheel
8. Fit the grip-ring (
Fig. 28 ref. 1
) in the nut (
Fig. 28
ref. 2
) and fasten the cone (
Fig. 28 ref. 3
).
12.2 Fitting of the wheel (
GP3.140R -
GP3.140RS)
1. Remove any type of foreign body from the wheel
(
Fig. 30 ref. 3
): pre-existing weights, stones and
mud, and make sure the mandrel (
Fig. 30 ref. 1
)
and the rim centring area are clean before fitting
the wheel on the mandrel.
2. Carefully choose the cone (
Fig. 30 ref. 2
) most suit-
able for the wheel to be balanced. These accessories
must be selected according to the shape of the rim.
Position the wheel (
Fig. 30 ref. 3
), fitting the cone
(
Fig. 30 ref. 2
) on the mandrel (
Fig. 30 ref. 1
): be
careful (otherwise this could seize) until this rests
against the support flange (
Fig. 30 ref. 4
).
3. Fit the wheel with the inner side of the rim towards
the wheel balancer and against the cone.
Fig. 29
Open/close
the pneumatic
mandrel
Brake the wheel
Open the pneumatic mandrel by means of the special
pedal, see
Fig. 29
.
THE GRIP-RING (FIG. 28 REF. 1)
MUST BE MOUNTED WITH THE
TEETH SIDE TOWARDS THE RING-
NUT (FIG. 28 REF. 2).
1297-M007-1_R
G3.140R - GP3.140R - G3.140RS - GP3.140RS
RAVAGLIOLI S.p.A.
