manualshive.com logo in svg

Ravaglioli G1150.30MAGICIT, Инструкция по эксплуатации

Поделиться
Скачать
Ravaglioli G1150.30MAGICIT Скачать руководство пользователя страница 15

GB

Page 15 of 32

INSTRUCTION, USE AND

MAINTENANCE MANUAL

G1150.30MAGIC - G1150.30MAGICIT

RAVAGLIOLI S.p.A.

7107-M001-0_R

Fig. 14

KEY (Pedal 

Pos. B

)

Pos. 1 - Tyre inflation with pressure gauge
Pos. 2 - Tyre inflation with pressure gauge + inflation

nozzle

12.0 USING THE MACHINE

12.1 Precaution measures during tyre

removal and fitting

Before fitting a tyre, observe the following safety rules:
• rim and tyre must be clean, dry and in good condition.

If necessary, remove the balancing weights and clean
the rim. Check:
- tyre bead and tread for damage.
- rim for dents and/or deformation (especially for alloy

rims, dents can cause internal micro-fractures, that
pass unobserved at visual inspection, and can com-
promise the solidity of the rim and constitute danger
even during inflation).

• adequately lubricate the contact surface of rim and

tyre bead. Use specific tyre lubricants only.

• replace the inner tube valve with a new valve. If the

tyre tube has a metal valve, replace the grommet.

• make sure that the tyre is the right size for the rim.

Never fit a tyre unless you are sure it is the right size
(the rated size of the rim and tyre is usually printed
directly on each of them).

• Do not use compressed air or water jets to clean the

wheels on the machine.

12.2 Preliminary operations - Preparing

the wheel

• Remove the wheel balancing weights from both sides

of the wheel.

REMOVE THE VALVE STEM AND

ALLOW THE TYRE TO COM-

PLETELY DEFLATE.

• Establish from which side the tyre should be

demounted,  checking the position of the channel.

• Find the rim locking type.
• Try to establish the special types of wheels, such as

“EH2” and “EH2+”, in order to improve locking, bead
breaking, assembly and disassembly performances.

Содержание G1150.30MAGICIT

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды