minCam Manual
5
5. Operating the Pan & Tilt camera head
Most of the camera operation can be done using the remote control. Only two functions are
unique to only the control unit: sonde frequency control and system power. The other control
unit functions are redundant operation controls.
5.1 Bluetooth Remote Control
The remote control is stored in the monitor case. While positioned in the case, the remote
control charges wirelessly via induction, and the charging status is indicated by the red LED.
The system can be operated by leaving the remote control in the case.
To use the remote control, first it needs to be turned on (green LED) by pressing
The remote control will work as soon as the Bluetooth connection is made
– a solid blue LED.
The blue LED is blinking while searching for a connection.
For rotation, pan, and tilt of camera, move the joystick to the desired direction.
The remote shuts down if not used for 10 minutes.
Joystick for camera head
positioning.
LED light regulation
4 Step Digital Zoom:
0, 1, 2, or 3
Automatic self-leveling
picture
Macro camera positions:
0° straight ahead, 90° wall,
or 270° wall
360° rotation macro
Remote Control On/Off
(press for 4 sec. to turn off)
LEDs all on (tank inspection)
Bluetooth LED
Battery Charging LED
Remote Control On LED
