Video Floppy Control
1.
If after selecting a
video floppy source
the monitor shows no
image, the machine
may be off. To turn
on, press Stop and
wait 5-10 seconds.
2.
Step or Step
moves a video floppy
disc backward or
forward a frame at a
time. Play starts the
Auto Advance Mode
(default time interval
is 4 seconds). Push
Play again to stop
auto advance.
3.
Frame + <Frame
#> + Enter will
move to a specific
frame.
4.
Display toggles
the frame numbers
display on the
monitor.
CD-I Control
1.
Play starts a program and is the
equivalent of a mouse click. Use the
, ,
Play
( ), and Pause (
❙❙
)
keys to control the cursor and
emulate the CD-I mouse or joystick.
2.
Play ( ) moves the cursor up.
Pause (
❙❙
) moves the cursor down.
moves the cursor left.
moves the cursor right. Press Play
when prompted to make a
selection.
Laser Disc Control
1.
To start a disc press
Play ( ). To halt,
press Pause (
❙❙
). To
step forward or
backward between
frames press Step or
Step . Note: do not
press Stop to
temporarily halt a
laser disc.
2.
Fast Forward (
)
or
Rewind (
)
moves a CAV disc
backwards or forward
by frame. Holding
either key down scans
CLV discs.
3.
On CAV discs,
C
<Chapter #> +
Enter will move to a
specific chapter.
Frame + <Frame #>
+ Enter will move to
a specific frame.
4.
On CLV discs, press Frame +
<H:MM:SS> + Enter to move to a
specific time location on the disc.
To start a program press Play.
5.
To view the chapter or frame
numbers (time on CLV discs) press
Display. Repeat the procedure to
toggle the display off.
