Rauch SA 121, Руководство оператора

Страница: 75 / 90

11.4 Replacing the agitator
n
Dismounting the agitator
The agitator is fixed with a bayonet lock.
u
Open the hex cap screws at the protective
grid in the hopper.
u Remove the protective grid.
u
Turn the agitator clockwise until it reaches
the stop.
Fig. 27: Hopper without protective grid
u Lift the agitator out in an upwards direction.
Fig. 28: Dismounting the agitator
n
Mounting the agitator
Mount the agitator in the reverse order. See 7.5 Mounting the agitator
• Grease the bayonet lock and the agitator.
• Ensure that the bayonet lock of the agitator engages securely.
11.5 Spreading vane replacement
n
Spreading vane
11. Maintenance and service
SA 121 5901026
75