Rauch QUANTRON, Дополнительные инструкции

Страница: 39 / 110

u Press the kg key.
The operating screen is displayed again.
Requesting the remaining quantity during spreading
During spreading, the remaining quantity is continuously recalculated and displayed.
Refer to Chapter 5 Spreading operation
4.3.3 Zero scales
Only for AXIS with weigh cells
In this menu, set the weighing value for the empty hopper to 0 kg.
For taring the scales, the following requirements have to be fulfilled:
• the hopper is empty,
• the machine is at a standstill,
• the PTO is switched off,
• the machine is in a horizontal position and off the ground,
• the tractor is at a standstill.
Zero scales:
u Access the menu Weighing/Trip count. > Zero scales.
u Press the Enter key .
The weighing value for the empty scales is now set to 0 kg.
The Weighing trip counter menu is displayed.
Tare the scales before each use in order to ensure problem-free calculation of the remaining
quantity.
4. Operation
QUANTRON-A AXIS/MDS 5902662
39