Rauch QUANTRON-K2, Инструкция по эксплуатации

Страница: 77 / 102

Spreading operation using the QUANTRON-K2 Control unit
71
5
5.2.2 Winter spreader with two actuators for the spreading width limiter
(Dispersion AUTO deactivated)
The option with 2 installed actuators enables switching from a symmetric to an
asymmetric spreading pattern while spreading.
1. Select the desired function for spreading width limitation using the L/R key.
Select the side for the spreading width limiter plates that you wish to adjust
by pressing the
L/R key multiple times.

Left

Right
Figure 5.4: Asymmetric spreading pattern (example)
Spreading width adjustment to the road during spreading operation.

F1 [1]: Lower the spreading width limiter plates on the desired side.

F2 [2]: Raise the spreading width limiter plates on the desired side.
NOTICE
The position of the half-side slide must be adjusted to ensure even lateral
distribution.
NOTICE
More information on settings for the half-side slide is provided in the operating
manual for the AXEO winter spreader, chapter 7.7.
1 2