Rauch QUANTRON-K2, Инструкция по эксплуатации

Страница: 16 / 102

Layout and function 2
10
The symbols and displays in the example have the following meanings:
No. Symbol/Display Meaning (in the example shown)
1 Position of the right
spreading width
limiter plate Current opening position of the right spreading width
limiter plate, subdivided into 5 positions.
2 Operating mode Display of the set operating mode (MAN scale, MAN
km/h, AUTO)
3 Documentation The symbol is displayed if Documentation is running.
4 Additional quantity,
Special spreading While pressing the special spreading key (see
Figure 2.2 ), the additional percentage quantity
indicated here is spread.
5 Metering slide
position Display of the metering slide position in a range
of
0 to 56 .
6 Half-side slide
position Display of the half-side slide position in a range
of
0.0 to 5.0 .
7 Half-side slide
open/closed The symbol is displayed when the half-side slide is
not in the open position.
8 Metering slide
open/closed The frame is filled in red when the metering slide
opens.
9 Spreading density
adjustment Adjustment of the spreading density up ( + ) and
down ( - ).
10 Spreading pattern
adjustment Adjustment of the spreading width limiter plates
in 5 steps. Depending on the configuration, the
following adjustment options are available:

Right only

Left only

Right and Left together
Or, depending on the configuration, adjustment of:

Working width

RPM
11 Display fields Individually configurable display fields; here, spread-
ing width and speed.

Possible configuration: see
chapter
4.10.2: Display configuration, page 59 .
12 Simulated speed The symbol indicates that the simulated speed is
active.
13 Minimum mass
flow Warning during spreading: The spreader is working
independently of the configured spreading density
using the minimum mass flow of
5 kg/min .
14 Spreading disc
speed In the HydroControl version, the symbol shows the
current spreading disc speed.