Rauch QUANTRON-A, Инструкция по эксплуатации

Страница: 59 / 120

Operation QUANTRON-A
53
4
4.6.9 Calculate OptiPoint (AXIS only)
In the Calculate OptiPoint menu, enter the parameters for calculating the
optimal switch-on/switch-off distances in the headland .
For an exact calculation, it is very important to enter the distance factor of the
fertiliser used.
1. Enter the specified value in the Fertiliser settings > Distance factor menu.
2. Call up the Fertiliser settings > Calculate OptiPoint menu.
 The first page of the Calculate OptiPoint menu appears.
3. Enter the Average forward speed in the area of the switch positions.
4. Press OK .
5. Press the enter key .
 The third page of the menu is displayed.
Figure 4.12: Calculate OptiPoint, page 3
NOTICE
The distance factor for the fertiliser used can be taken from the fertiliser chart of
the machine.
NOTICE
The specified forward speed refers to the forward speed in the area of the
switching positions. See chapter
5.7: GPS Control, page 100 .
Number Meaning Description
1 Distance (in metres) away from the field border at
which the metering sliders open Page 101
2 Distance (in metres) away from the field border at
which the metering sliders close. Page 102
1
2