Rauch K 51, Инструкция по эксплуатации

Страница: 53 / 64

Maintenance and service
47
9
9.4 Checking the agitator
9.4.1 Dismounting the agitator
9.4.2 Exchanging agitator fingers
1. Pull out the linkage pin.
2. Take out the agitator.
Figure 9.1: Agitator in hopper
1. Use tongs to push the old ag-
itator fingers out of the agita-
tor.
Figure 9.2: Agitator with old agitator fingers
2. Use tongs to pull the new ag-
itator fingers in the agitator.
Figure 9.3: Agitator with new agitator fingers
NOTICE
Install the agitator in reverse order.

When installing the agitator, lubricate it using grease.

Check if the linkage pin is locked in place.