Rauch AXMAT DUO, Инструкция по эксплуатации

Страница: 23 / 44

Operating the AXMAT system
19
4
Assembling the measuring tubes
4.1.2 Requirements and conditions

Conduct the test on a dry day , with no wind , so the weather will not influence
the result.

We recommend a testing area that is horizontal in both directions. The tracks
must
not have any significant cavities or heights since this may distort the
spreading pattern.

Carry out the test either on freshly mown grass or on a field with low vegeta-
tion (max. 10 cm).
1. Insert the locking bolts [3]
into the support feet [4].
2. Fit the pipe [2] onto the
locking bolts.
3. Insert the funnel [1] into
the pipe.
Figure 4.2: Assembling the measuring
tubes
1
2
3
4
NOTICE
Observe these conditions to ensure that the results are as accurate as possible.