Rauch AXIS-M 20.2 EMC, Инструкция по эксплуатации

Страница: 202 / 236

Maintenance and repair C
182
AXIS
AXIS
50.2
C.2 Using the steps
C.2.1 Safety
Always keep in mind that troubleshooting involves additional hazards in case you
are climbing into the hopper.
Use the steps with extra care. Work particularly thoroughly and cautiously.
Observe the following instructions in particular:

Turn the tractor motor off and wait until all moving parts have stopped moving.
Take the ignition key out.

Only use the steps when the machine is lowered.

Only use the steps if they are folded out.

Do not climb over the hopper cover into the hopper.

Use the handle on the hopper cover.

Only climb into the empty hopper.
C.2.2 Folding out the steps
Before folding out the steps:

Disengage the PTO shaft.

Turn the tractor motor off.

Lower the fertiliser spreader.
n
DANGER
Risk of injury due to moving parts in the hopper
There are moving parts in the hopper.
The rotating agitator can cause injury to hands and feet.
 Turn off the agitator.
 Climb into the hopper only for troubleshooting purposes.
 The protective grid may only be opened for maintenance
purposes or in the event of a fault.
K
D
C
Q
W
R