Rauch AXIS-M 20.2 EMC, Инструкция по эксплуатации

Страница: 13 / 236

Navigation within the operator’s manual
AXIS
Navigation within the operator’s manual
Other symbols are indicated at the margin. These symbols simplify the navigation
through the entire documentation. If the letter for your machine version is greyed,
the contents on the page are not relevant for your machine.
Example:
NOTICE
All useful information on your machine can be obtained from the following tables.

The chapter Safety is to be respected at all times.

Thoroughly read all subsections for your machine type. By doing so, you can
use your machine in a safe manner.

The functional description is provided under “Description of the machine“ on
page 25 and “Versions“ on page 32 .
The text contents on this page are
only relevant
for the machines of
the versions K, D and R .
Figure 1: Navigation symbols
NOTICE
Designation of the machine with the M EMC function
The designation EMC and/or EMC + W refers to the machines
AXIS-M 20.2 EMC (+ W) and/or AXIS-M 30.2/40.2 EMC (+ W) .
The component designation "-M" (abbreviation for mechanical drive) does not
appear in the operator’s manual. This makes the machine designations, e.g. in
headlines, clearer.
K
D
R
C
Q
W
EMC