Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 17 / 136

Safety
9
3
3.5.3 Filling the machine

Only fill the machine when the motor of the tractor is stopped. Remove the
ignition key in order to ensure that the motor cannot be started.

Use suitable auxiliary equipment for filling the spreader (e.g. front-end loader,
auger, silo).

When manually filling it (e.g. loading it with big bags), use suitable steps.

Fill the machine no higher than the top-edge. Observe the maximum admis-
sible payload.

Only fill the machine when it is mounted.

Only fill the machine when the protective grid is closed. This way, faults during
spreading caused by lumps in the spreading material or other foreign bodies
are prevented.
3.5.4 Checks before start-up
Check the operating safety of the machine before the first and every subsequent
start-up.

Is the entire safety equipment installed at the machine and functional?

Are all fasteners and load-bearing connections tight and in proper condition?

Are the spreading disc, the spreading vanes and their fixings in proper condi-
tion?

Is the protective grid locked in the hopper?

Are all locks firmly closed?

Is the hazard zone of the machine clear of persons?

Is the universal drive shaft guard in good condition?

Check the mounting height. The distance from the lower edge of the frame to
the floor may not exceed
120 cm .