Rauch AXENT Series, Руководство оператора

Страница: 55 / 170

Transport without tractor
49
5
5 Transport without tractor
5.1 General safety instructions
Read the following instructions before transporting the machine:

Without a tractor, the machine may be transported only with an empty
container.

Work may be carried out only by suitably instructed and expressly authorized
persons.

Use suitable means of transport and lifting equipment (e. g. low loader with
wheel recess, lifting tackle ...).

Determine the transportation route early, and remove possible obstacles.

Check that all safety and transportation devices are fully operational.

Secure all danger areas appropriately, even if they only exist briefly.

The person responsible for transport must ensure the machine is transported
appropriately.

Unauthorised persons are to be kept away from the transport route.
Cordon off the affected areas.

Cautiously transport the machine and handle it with care.

Pay attention to the centre of gravity!
5.2 Loading and unloading, parking
1. Determine the weight of the machine.
Observe the specifications in the chapter
Technical data .
2. Carefully drive the machine from or onto the loading platform with a suitable
tractor.
3. Carefully set the machine down on the loading platform of the transport
vehicle or on solid ground.
n
CAUTION
Material damage due to incorrect transport
The ring eyelets in the container are not intended for lifting the
entire machine. They only serve to transport the container during
production.
Non-observance will result in damage to the machine.
 Observe the shipping instructions of the manufacturer.