Rauch Axent Isobus, Инструкция по эксплуатации

Страница: 58 / 74

Operation AXENT ISOBUS 4
52
4.11.3 Zero scales (only large area spreader with weighing function)
In this menu, the weighing value for the empty hopper is to be set to 0 kg.
For taring the scales, the following requirements have to be fulfilled:

the hopper is empty,

the machine is at a standstill,

the machine is in a horizontal position and off the ground,

the support stand is retracted.

the PTO shaft is switched off.

the tractor is at a standstill.
1. Open the Weighing/Trip counter > Zero scales menu.
2. Press the Zero scales button.
 The weighing value for the empty scales is now set to 0 kg.
Figure 4.22: Weighing/Trip counter menu
NOTICE
Tare the scales before each use in order to ensure problem-free calculation of
the residual quantity.